At the Beach - News & Updates from Sunland Guitars RSS

  This video shows you how to make a new pickguard step by step. You can use the same process for making any new pickguard from an existing one. It doesn't matter whether it's acoustic or electric.

  This video shows a pickup swap on a vintage Fender Mustang Bass. I go over some troubleshooting with the screws and pickguard and explain what pickup goes in which position.

Want to make give that wimpy strat of yours some real power? Learn about the TBX tone control and The Clapton Mid-Boost Circuit in this video.   Wiring Diagram: Here's a link to the TBX Tone Pot: https://www.musiciansfriend.com/accessories/fender-tbx-tone-control/361264000000000?cntry=US&cur=USD&cntry=US&cur=USD&utm_content=361264000000000--Fender+TBX+Tone+Control&source=3WWRWXGS&gclid=Cj0KCQjwiZqhBhCJARIsACHHEH8wg1cjmdTX96ch8KkUcS0_CwAS58zmyUJcbKLGQNJXrv3GVlymBS4aAqYwEALw_wcB Here's a link to the Clapton Mid-Boost Circuit: https://www.guitarfetish.com/Clapton-style-mid-boost-circuit-Drive-your-amp_p_194.html Thank you so much for watching! Please like and subscribe for more content like this!  

Install Video: How String Up Your Guitar With The Ball Ends at the Top Video https://youtube.com/shorts/ULJoVW_0xXI?feature=share EVH® D-Tuna® Instructions Step 1: Stabilize the bridge. You need to "block" the bridge so it doesn't pull back. Use a tremolo stopper, shim or wedge on the block of the bridge in the tremolo cavity. Make it fit snugly against the base plate is level with the body and can't pull back. Note: If your bridge is flush mounted, skip this step.  Step 2: Remove the string locking screw from the Low-E saddle on the bridge. Replace it with one of the two D-Tuner...

AMPTURCO: https://www.ampturco.com/category/harnesses Watch how to swap out the stock Gibson quick connect SG wiring harness for a new AMPTURCO wiring harness. Red = Hot Black + Bare = Ground Green + White = Split coil wires, solder together and pin out of the way.